Terms & Conditions

Mighty Moose Manufacturing LLC

Effective Date: October 10, 2026

These Terms & Conditions govern custom services provided by Mighty Moose Manufacturing LLC, including CAD modeling, 3D scanning, reverse engineering, prototyping, fabrication, and custom manufacturing.

By signing or otherwise accepting a quotation or estimate that incorporates these terms, the customer agrees to be bound by them. Any project-specific terms expressly agreed upon in writing will take precedence over conflicting provisions in these general Terms & Conditions.

PAYMENT & DEPOSITS

Any deposit shown on a quotation or estimate is due before work begins and will be applied toward the total project cost. Deposits become non-refundable once work has begun or project-specific materials, products, or outside services have been ordered or committed. The remaining balance is due upon project completion and before final files, products, or other deliverables are released, unless otherwise agreed in writing. Any alternative payment terms, including delivery before final payment, must be agreed upon separately in writing. If Mighty Moose Manufacturing LLC is unable to reasonably complete a project, any unused portion of the deposit, less completed work and non-refundable project-specific costs already incurred, will be refunded.

PAYMENT REFUNDS

Except where Mighty Moose Manufacturing LLC is unable to reasonably complete the project or where otherwise required by law, any deposit that has become non-refundable under the Payment & Deposits terms will not be refunded. If the customer has paid amounts exceeding the applicable non-refundable deposit, any refund following cancellation will be calculated after deducting completed work and any materials, products, outside services, or other project-specific costs already incurred or committed. Nothing in this provision limits any rights that cannot legally be waived.

CUSTOMER-PROVIDED PARTS & INFORMATION

The customer is responsible for providing reasonably accurate requirements, measurements, reference information, parts, files, and other information necessary to complete the work specified in the quotation or estimate. Mighty Moose Manufacturing LLC will take reasonable care of customer-provided property while it is in its possession. Normal handling associated with scanning, measuring, fixturing, prototyping, inspection, or other services specified in the quotation or estimate may be performed as reasonably necessary to complete the work. Any modification that may intentionally and permanently alter customer-provided property will require customer approval beforehand.

SERVICE MODIFICATION

Changes requested by the customer after acceptance of the quotation or estimate may affect the project price, schedule, materials, manufacturing requirements, or deliverables.

Mighty Moose Manufacturing LLC may pause or modify work when reasonably necessary because of missing customer information, unavailable materials or outside services, technical limitations, safety concerns, changes requested by the customer, or circumstances that make the originally proposed method impractical.

Any material change to the agreed project scope or price will be communicated to and approved by the customer before the affected additional work is performed.

DESIGN REVISIONS

CAD/design work includes one (1) revision within thirty (30) calendar days from the date the initial completed files become available for delivery. The initial completed model constitutes the original deliverable and does not count as a revision. No revisions will be performed until the original project balance has been paid in full.

A revision consists of one consolidated round of customer-requested changes. The customer must provide clear, specific, and actionable instructions identifying the features or geometry requiring modification. Dimensional changes must include the desired final dimensions or measurable adjustments. General statements regarding improper fitment, appearance, or functionality without sufficient information to identify the required modifications are not considered complete revision instructions.

All requested changes must be submitted together as a single revision request. The included revision applies only to modifications within the original agreed project scope and does not include substantial redesigns, additional features, or changes to the original requirements.

Once the included revision has been completed and made available for delivery, any subsequent customer-requested revisions will be billed at the applicable hourly CAD/design labor rate. Additional revision work will be documented and invoiced separately, with customer approval of applicable charges required before work begins. Payment is required before the additional revised deliverables are released.

Verified modeling errors resulting from failure to follow explicitly agreed dimensions, specifications, or project requirements will be corrected without additional charge and will not consume the included revision. Changes resulting from previously unspecified requirements, customer-provided information, or inherent limitations of the scanning and reverse-engineering process are considered revisions rather than modeling errors.

Included revisions apply only to CAD/design work and do not include manufacturing, remanufacturing, replacement, or modification of physical parts.

3D SCANNING

3D scanning captures visible and accessible physical geometry. Certain surfaces, materials, recessed areas, obstructed features, or other conditions may result in incomplete or imperfect scan data. Adhesive or magnetic scanning markers may be placed on or around customer-provided property when necessary. Reasonable care will be taken during placement and removal; however, adhesive residue, minor surface marking, or other incidental effects may occasionally remain. Scanning or sublimating spray may also be applied when necessary to improve the capture of difficult surfaces. Reasonable care will be taken when selecting and applying scanning aids based on the material and condition of the item. Scan data and scan-derived files may contain holes, noise, marker impressions, surface artifacts, missing geometry, or areas reconstructed by scanning software. A scan-derived mesh, STL, or other scan file is not necessarily equivalent to a reconstructed CAD model or production-ready design. Unless specifically included in the quotation or estimate, 3D scanning does not include complete reverse engineering, dimensional reconstruction, extensive mesh repair, or creation of editable parametric CAD files.

MANUFACTURING & PRODUCTION

When a quotation or estimate includes manufacturing, 3D printing, fabrication, or other production of physical parts, acceptance of the quotation or estimate authorizes Mighty Moose Manufacturing LLC to produce or order the quantities listed using the design, specifications, and revision identified in the quotation or estimate.

The customer is responsible for reviewing and approving the applicable design, revision, specifications, quantities, materials, and other production requirements before authorizing production. Design revisions included with prior CAD/design services apply to the design work only and do not include the cost of manufacturing, remanufacturing, replacing, or modifying physical parts. Changes requested after production has been authorized may require a new quotation or estimate. The customer is responsible for costs associated with materials, parts, production, or outside services that have already been ordered, produced, or otherwise committed to the approved design.

Prototypes, 3D printed parts, first-run components, and other custom manufactured parts may require test-fitting, evaluation, or further design adjustment before final use or larger-scale production. Unless testing or validation is specifically included in the quotation or estimate, the customer is responsible for determining whether a completed design or part is suitable for its intended application.

INTELLECTUAL PROPERTY

The customer retains ownership of files, designs, drawings, trademarks, specifications, and other intellectual property provided by the customer. Upon full payment, the customer will own the project-specific final deliverables created specifically for the customer and identified as deliverables in the quotation or estimate. Native CAD files, editable source files, working files, intermediate files, raw scan data, and other source materials are included only when specifically identified as deliverables.

Mighty Moose Manufacturing LLC retains ownership of its pre-existing designs, templates, processes, methods, tools, know-how, and other intellectual property that is not created specifically as a project deliverable.

The customer represents that it has the necessary rights or permission to provide any designs, files, or other intellectual property supplied for use in the project.

SCAN-TO-CAD & REVERSE ENGINEERING

CAD models created from 3D scans, physical measurements, or other reverse-engineering methods represent a reconstructed approximation of the original physical component. Due to limitations in scanning accuracy, surface accessibility, mesh quality, geometric interpretation, and CAD reconstruction methods, exact replication of the original geometry cannot be guaranteed.

Dimensional and geometric deviations may occur in both mechanical and organic geometry, particularly with complex contours, curved surfaces, worn components, damaged features, or areas that cannot be fully captured or measured.

Unless specific dimensional tolerances have been established and agreed upon in writing before work begins, Mighty Moose Manufacturing LLC does not guarantee any particular level of dimensional accuracy, geometric conformity, fitment, or functional performance.

The customer is responsible for identifying critical dimensions, mating surfaces, clearances, tolerances, and functional requirements before work begins. Where these requirements are not provided, geometry may be reconstructed using available reference data, measurements, and reasonable engineering judgment.

The initial completed CAD model constitutes the original project deliverable, regardless of whether additional fitment adjustments or geometric refinements may subsequently be necessary. Customer-requested adjustments to achieve a preferred fit, dimension, appearance, or function are subject to the Design Revisions terms.

Mighty Moose Manufacturing LLC remains responsible for correcting verified errors resulting from failure to meet explicitly agreed project specifications or requirements. However, differences arising from scanning limitations, incomplete reference information, or previously unspecified requirements do not automatically constitute modeling errors.

CONFIDENTIALITY

Mighty Moose Manufacturing LLC will use reasonable care to protect non-public customer information, files, designs, measurements, and other information that is identified as confidential or would reasonably be understood to be confidential. Such information may be used or disclosed as reasonably necessary to perform the services specified in the quotation or estimate, including disclosure to vendors or service providers involved in the project. This provision does not replace or modify any separate non-disclosure or confidentiality agreement between the parties.

PROJECT PHOTOS & PORTFOLIO USE

Mighty Moose Manufacturing LLC may photograph or display non-confidential completed work, CAD models, scans, prototypes, manufactured parts, or project results for portfolio, website, advertising, or social-media purposes. Customer-confidential dimensions, proprietary files, or other sensitive project information will not intentionally be published without permission. Nothing in this section authorizes disclosure of information protected by the Confidentiality terms or by a separate confidentiality or non-disclosure agreement. The customer may opt out of public display of the project by notifying Mighty Moose Manufacturing LLC in writing.

WARRANTY AND WARRANTY DISCLAIMERS

Mighty Moose Manufacturing LLC will perform its services in a commercially reasonable manner consistent with the scope described in the quotation or estimate.

Because many services involve custom designs, prototypes, reverse engineering, 3D scanning, 3D printing, or low-volume manufacturing, results may require test-fitting, evaluation, adjustment, or additional development. Unless testing, certification, or validation is specifically included in the quotation or estimate, Mighty Moose Manufacturing LLC does not represent or warrant that a design, prototype, scan, manufactured component, or other deliverable is suitable for a particular application, load, environment, regulatory requirement, or safety-critical use. The customer is responsible for evaluating and approving the suitability of final designs and products for their intended application before use, installation, manufacture, or production.

LIMITATION OF LIABILITY

To the fullest extent permitted by law, Mighty Moose Manufacturing LLC will not be liable for indirect, incidental, special, consequential, or punitive damages arising from or related to the services, products, designs, files, or other deliverables provided under this agreement. Unless otherwise required by law, the total liability of Mighty Moose Manufacturing LLC arising from a project will not exceed the amount actually paid by the customer to Mighty Moose Manufacturing LLC for the specific project giving rise to the claim. Mighty Moose Manufacturing LLC is not responsible for losses resulting from customer-provided specifications, measurements, designs, materials, instructions, modifications, misuse, improper installation, use outside the intended application, or use of a prototype or unvalidated design as a finished production component. Nothing in this agreement excludes or limits liability that cannot legally be excluded or limited.

RIGHT TO TERMINATE

The customer may cancel a project by providing written notice to Mighty Moose Manufacturing LLC. Upon cancellation, the customer remains responsible for work completed and for project-specific materials, products, outside services, or other non-refundable costs already incurred or committed before cancellation.

Mighty Moose Manufacturing LLC may suspend or terminate a project for nonpayment, failure to provide information or approvals reasonably necessary to continue the work, unsafe or unlawful requests, or circumstances that make continued performance unreasonable or impractical. Any amounts owed for completed work or committed project costs remain due following termination. Provisions concerning payment obligations, confidentiality, intellectual property, limitation of liability, dispute resolution, and any other provisions that by their nature are intended to continue after completion or termination will survive termination of this agreement.

RESOLVING DISPUTES

The parties agree to make a reasonable good-faith effort to resolve any disagreement arising from the project directly before pursuing formal legal action.

This agreement will be governed by and interpreted in accordance with the laws of the State of Oregon, without regard to conflict-of-law principles.

Unless otherwise required by applicable law, any legal proceeding arising from or relating to this agreement will be brought in a court of competent jurisdiction in Jackson County, Oregon.